Pool Pump Demo

Are you looking for the Best Pool Pump ever? There are few things more enjoyable to own than a pool. Unfortunately, there are also a few things that are more expensive. Between maintenance costs, high insurance rates, and the general amount of gear necessary for space, one can rack up quite a large bill simply caring for the pool. In addition, this only barely factors in the human costs of having such an area, especially considering the frustration and confusion that can result when one first puts the pool in the ground. When comes to best pool pumps, at least, one can follow three hard but fast rules to eliminate some of the worries from the process.


Table could not be displayed.


pool pump reviews consumer reports

The Hayward 1.5 HP is efficient and self priming pool pump. It is practically maintenance free while being cost efficient and environmentally friendly. The Hayward Super Pool Pump is designed to be used for a variety of in-ground pools and spas. You can expect years of state-of-the-art performance and trouble-free service from your Hayward pool pump. The pump’s housing is made of high-quality material that resists corrosion. The motor’s innovative design allows the pump to run more efficiently on less power. This translates to substantial savings in electricity..


  • Easy to install

  • Durable construction and High-performance

  • Self-priming

  • Easy to clean strainer

  • Extra-large leaf basket can hold more leaves and debris

  • Save on electricity


  • There is only single speed setting

swimming pool filtration pumps

Hayward SP1580X15 Power-Flo LX Series is the one of the best above the ground pool pumps for you in case you are looking for an ideal pumps. Powered with a 1-1/2 horsepower motor, it comes with a 6-foot cord. The Hayward Power-Flo pool pump is a high-performance yet affordable product. With this good ground pool pump, you don’t have to worry about rust or the motor overheating. The pump is self-priming for ease of use and you can always count on a relaxing pool experience.


  • High-performance motor

  • Corrosion-proof housing

  • Quietly Operated

  • Affordable


  • Only one speed

  • No ON/OFF Switch


Pentair 011017 Intelliflo is the quietest pool pump.It comes with a 230-volt 16 amp motor that provides variable speed for optimum performance and efficiency. Energy efficiency coupled with safety that makes Pentair 011017 IntelliFlo VS+SVRS High-Performance Pool Pump.

The heart of this pool pump lies in the exclusive IntelliFlo system that allows the user to program the exact pump speeds for specific operations. You can dial in the ideal pump speeds for filtering, cleaning, heating, spa jets, and other water features. This allows energy costs to be reduced up to 90 percent.


  • 4 Variable Speeds

  • Built-in Safety Vacuum Release System or SVRS

  • Quietly Operated

  • Password protected safety lock-out feature

  • Long Battery Life


  • A Bit Expensive


To keep the water in your above ground swimming pool crystal clear, what you need is the Hayward SP1593 Power-Flo Matrix Above-Ground 1.5 Horsepower Pump with Cord. This best energy efficient pool pump will maximize your enjoyment of your swimming pool while keeping maintenance work to a minimum.The Hayward Power-Flo Matrix is specially designed for above ground or on ground pools. The pump can switch from vertical to horizontal discharge with the push of a button.


  • Easy to install

  • Large Strainer Basket

  • Durable housing

  • Long lasting

  • On/Off switch


  • Short 6-foot cord


Pentair 011013 IntelliFlo VS 3050 Pool Pump is available in an attractive almond color and is considered to be a high-end option.It can be programmed for four different speeds that are ideal for pool, spa or water feature applications.Digital controls allow the user to program the ideal pump speeds for filtering, cleaning, heating, spa jets, and waterfalls. To save on energy, the pump can be set for the minimum speed required for a certain task. The IntelliFlo system self-adjusts to maintain optimal flow rates. This results in more energy savings.


  • Four-speed settings to choose from

  • Longer pump service life

  • Energy efficient


  • A Bit expensive


The maintenance system of the pool has to be very good to enhance the swimming experience by keeping the pool free of debris, dirt, and bacteria. The pump and the filtration system of the pool play a vital role in keeping the pool clean. A pool pump is a simple gadget but it is the core of your pool’s maintenance system.

Why Do You Need A Water Pool Pump?

A pool pump is used to circulate water through the pool filtering system to minimize algae growth and eliminate debris. It mixes chemicals and filters water keeping the pool clean. To ensure that the filtering system operates efficiently, one needs to select the correct pump for the pool. If the pool pump is too small, it will have a difficult time in circulating water and will run less efficiently.  When operated correctly, it reduces the energy cost required for maintaining the pool and also results in sparkling clean water with nearly no debris or contaminates.

types of pool pumps


Single-speed pumps are the most commonly available pumps in the market and operate on induction motors. Depending on its horsepower, the motor spins the impeller at a certain fixed speed. This type of pump usually runs on either 120 or 220 standard voltage. Single-speed pool pump will run with only one constant speed that cannot be increased or decreased when the unit is in operation. It has a standard speed of 3450rpm and can be controlled by simply using on and off mode. It can fill or empty the pool immediately. Single speed pool pump comes in various horsepower and are quite effective.


  • Single-speed pool pumps are the oldest pool pumps and easy to install. Once turned on, they run at a constant speed.

  • They can be controlled with a simple on and off mode.

  • Single-speed pool pumps are foremost to use when one needs to immediately empty or fill the pool.

  • They come in various power ratings and are reasonably effective.

  • They are the least expensive out of the various types of pool pumps available in the market.

  • Single-speed pool pumps usually last for 3-8 years depending on how they have been maintained.


  • Single-speed pool pumps consume high electricity which is usually more than any other appliance in the household.

  • They are noisy.


Variable-speed pool pumps are the latest in the category of pool pumps. They use permanent magnet motors and allow the speed to be exactly adjusted to the desired flow rate. They offer many speeds between off to high hence providing the greatest amount of flexibility. This creates less friction on the filter, piping, and accessories, allowing the pool to run at much lower energy as well as less wear and tear, saving money and increasing the lifespan of the pool equipment. Variable-speed pool pumps can operate at as low as 600rpm and as high as 3450 rpm and any speed in between.


  • Since they have excellent flexibility in terms of choosing between various speeds, they provide greater energy savings hence more savings on monthly utility bills.

  • Even though it is more expensive than the other types of pool pumps, they are 90% more efficient than the single-speed pool pump.

  • The built-in timer feature allows creating an operating schedule that can fluctuate between high and low speed throughout the day.

  • Since the speed can be adjusted as per the required job, it puts less strain on the motor and other pool equipment.

  • Variable-speed pool pumps are relatively much quieter than other types of pool pumps.


  • Many consumers hesitate to buy variable-speed pool pump due to the higher price. It is significantly more than single-speed pool pump and slightly higher than a dual-speed pool pump.


Two-speed pool pumps or Dual-speed pool pumps, as the name implies, have two speeds and operate on induction motors. It functions similar to a single-speed pool pump with the only difference that it has high and low speeds. The low speed is usually set at 1725rpm and the high speed will be double at 3450rpm.  2 Speed pool pumps use a toggle switch or a frequency inverter. The low speed is usually used for basic functions like circulation and filtration and the high speed is used for emptying the pool when running simultaneously with swimming pool heaters and other operations that require more power. They are more popular than the single-speed pool pump for their energy-saving reason.


  • They save less energy when compared with variable speed pool pumps.

  • Since they can switch between two speeds, they provide the water flow just needed to get the job done. Hence no extra energy is used, only what is essential.

  • They can be easily switched to high speed when required to clean the pool or operate water features and fulfill these demanding functions efficiently.

  • In case someone uses low speed to clean and filter the pool, and it runs for more hours compared to high speed, the amount of energy used for the extra hours of operation will still use less energy.

  • Variable-speed pool pumps are relatively much quieter than other types of pool pumps.


  • Two-speed pool pumps require an automatic controller.

  • They are more expensive than single-speed pool pumps.

  • They save less energy when compared with variable speed pool pumps.

What To Look For In Your Pool Pump?

  • Flow Rate

The flow rate is measured in GPM that stands for gallons per minute. The flow rate means the amount of water the pump can process in a set amount of time. In order to choose the right pool pump, you need to know the minimum and maximum flow rate. To circulate entire water in the pool through the filter within a certain number of hours, the minimum flow rate must be maintained. It is also known as turnover time and usually, 8-10 hours is considered a good turnover time for a home pool. You can establish your required flow rate once you know the required turnover rate.

  • Plumbing Pipe Sizes

It is considered the most overlooked part of a pool project. There are different sizes of pipes such as 1.5”, 2.0”, 2.5” and 3.0”. Ideally, you should put a larger pump on a pool plumbed with a larger pipe but putting a larger pump on a pool with a smaller pipe can cause damages. If you install a two horsepower of the pump and let the water flow through 1.5” of pipe, it will cause strain on the pipe due to the amount of water moving through the pipe which would be more than it can bear. Simply put, bigger pipes can handle a large volume of water and smaller one less amount.

  • Head

The head refers to the amount of resistance created by a pool’s plumbing system. It is usually measured in “feet of head” or “feet of resistance.” In other words, by adding up the entire pipe, fittings, valves and other equipment you will get Total Resistance. Depending on the levels of resistance, the pool pumps generate different flow rates. It’s important to know the pool pump feet of head to match a pool pump size to the pool filter’s design flow rate. Forcing the water through pipes along with all the bends and twists, it makes, increases friction before and after the pump.

  • Choose A Pump With Strong Warranty

Needless to say, you should go for the brand that offers a longer warranty period on the pool pump. Most of the well-known pool pump brands like Hayward, Pentair, and Jandy pool pumps offer a one-year standard warranty. However, if you dig deeper you will come to know that there are brands like EcoPump that offer a three-year warranty on its pumps. No, there is no catch behind it, however; it would be interesting to know that most of the expensive pumps have onboard electronic circuits which have a high probability of failure. On the other hand, it does not happen with the pumps that have simple switches.


You need to choose a good pool pump that is not just easy to install but also operate. Though some brands offer installation that may be part of the purchase, some may charge you for it. It is recommended to get the pump installed by a professional to prevent voiding or lessening of the warranty period. The correct operation of the pool pump is equally important for its longevity. Obviously, if you operate incorrectly, your energy charges will go up and it may cause damage to some of the electronics part which the warranty may not cover. Always thoroughly read the owner’s manual before installing and operating the pool pump.

  • Horsepower And Voltages

The residential pool pumps usually come in different pump sizes from 0.5 to 3.0 horsepower. You need to figure out the least powerful pump that gets the work done since it will help in saving the operating costs in the longer run. Moreover, running the pool pump for only eight hours will increase your savings phenomenally. The equally important factor is the voltage supplied to the unit. Higher horsepower pumps mostly operating in 230v only. This means that if you have 120v standard household current available, you will not be able to run a larger pump. Therefore, you need to have the right voltage input to operate the right kind of pump size.

  • How Does A Pool Pump Work?

Now that you know the essentials of the most efficient pool pump, let’s look at how it works. Your pool pump and filter add a ‘closed loop’ system. It starts by drawing water from the pool and the skimmer. Then, it is delivered to the pump and motor. Once it reaches the pump, the water goes through an initial filter known as the “strainer pot basket”. This can take away most trash from the water before sending it on to the pump housing. It then passes via the motor to your pool’s cartridge filters that take away any remaining trash and contaminants from the water. Next, the water is passed onto your pool’s heater, to heat the water to the required temperature. When it reaches the acceptable temperature, it is passed onto a chlorinator and sent back to the pool.

Benefits Of A Ideal Pool Pump

A pool pump is a vital part of a swimming pool’s circulation system and ensures a hygienic and safe environment for you to swim in. The following benefits are attributed to the pool pump:

Saves Energy Saves Money:

Research has proved that a pool pump can be responsible for contributing as much as 30% to your household bills. However, if used smartly and efficiently they save energy as well as your money. By getting a professional’s opinion about the type of pool pump that is suitable for you, you will save energy as well as money. Smaller sized pumps are highly efficient and effective in doing the job and meanwhile being easy on energy consumption as well as the monetary expenditure. Furthermore, running your pump at a lower speed cycle saves an abundant amount of energy and obviously your money.

Long Life Span:

The pool pump like any other machine needs proper care and maintenance. However, by paying a little attention to the filters of the pool cleaner, the life span of the pool cleaner gets enhanced considerably. Also by employing a smaller sized pump, the wear and tear of the pump are reduced. By making sure that your pool pump is as per the requirement of your swimming pool you will automatically ensure a longer life span of your pump. The life span of your pump also depends on the speed at which you operate your pump. Research has established that operating your pump on a variable speed guarantees longer longevity of the pool pump.

Quiet Operation:

Unlike most motor operated machines a pool pump does not create an unbearable amount of noise. It is imperative to keep the pool pump in good condition and running smoothly in order for it to operate noiselessly. The filter of the pool pump must be regularly and laboriously cleaned in order to ensure that the pump keeps running smoothly and noiselessly. Reducing the speed of the pool pump is also an effective way to diminish the sound produced by the pump.

Avoid Algae Build-up:

It is advised by professionals that the pool pump must be kept running for a minimum of three to four hours each day in order to have a sparkling clean and hygienic swimming pool. Apart from cleaning the debris and dirt, the pool pump also ensures that there is no built up of algae on the floor as well as the wall of the pool. The pool pump when operational works vigorously to filter the entire water of the swimming pool. By continuously filtering the water of the pool, the pool pump ensures there are no algae built-up at all.

Achieves Clean Water:

The purpose of a pool pump is to keep the water of your swimming pool crystal clean, safe and hygienic for use. By constantly functioning for the allotted time period every day, the pool pump efficiently ensures that you have clean, purified and hygienic pool water by keeping the pool debris and algae free. Make sure you run your pump at a slower speed to attain top results.


Install a pool pump today if you haven’t already. A pool pump is a blessing for all the pool owners as it will definitely grant you with the cleanest pool possible by taking care of all the debris and algae built up. Not only does this machine conserve energy and save money but also has a long life span which means once this pump is installed there is no need to replace it any time soon. Being the heart of the pool circulations system, a pool pump will enhance your pool experience by giving you fresh, clean, purified, hygienic water.